<thead id="plp1r"></thead>
<listing id="plp1r"></listing>
<var id="plp1r"></var>
<cite id="plp1r"></cite><cite id="plp1r"><video id="plp1r"><menuitem id="plp1r"></menuitem></video></cite>
<var id="plp1r"></var>
<var id="plp1r"></var>
<cite id="plp1r"></cite>
<cite id="plp1r"></cite><var id="plp1r"><strike id="plp1r"></strike></var>
<cite id="plp1r"><span id="plp1r"></span></cite>
<cite id="plp1r"></cite>
<cite id="plp1r"><video id="plp1r"></video></cite>
<var id="plp1r"></var>
<var id="plp1r"></var>
Menu Language:Espa?ol / русский

Product

Surface table Coil Sheet Strip Package

2D

A matt non-reflective finish produced by cold rolling followed by annealing and descaling. The dull finish may result from the picking operation or rolling on dull rolls.

Available in 304 / 409.

2B

A bright, moderately reflective cold rolled with the annealed and descaled coil receiving a final light pass through polished rolls. 2B is the most commonly used surface finish.

Available in 304 / 430 / 201 / 409 / 410 / 316.

BA

A bright annealed finished approaches a mirror-like appearance. The final appearance is developed by a single light skin pass through a cold mill over highly polished rolls. Typically uses include appliance components, cookware, food processing equipment.

Available in 304/430/201/410.

NO.4/NO.3

NO.4/NO.3 finished is a general purpose polished finish widely used for restaurant equipment, ship fronts and dairy equipment. Following initial grinding with coarse abrasives, final finishing generally is done with abrasives having a particle size of approximately 120 to 150 mesh.

Available in 304/430/201/316.

NO.8

NO.8 finish, the most reflective finish that is commonly produced on sheet, is obtained by polishing with successfully finer abrasives and buffing extensively with very fine buffing rouges. NO.8 is most widely used for architectural parts, small mirrors and reflectors and for press plates.

Available in 304/201.

NO.1(Checker Plate)

Condition and finish commonly preferred fir corrosion resisting and most heat resisting applications. NO.1 is commonly used for raised angular rolled onto the surface to provide skid resistance.

Available in 304/430/201/410/316.

SB(Scotch-Brite)

It's a semi-dull finish with uniform grain, which is obtained using finer abrasives than No.4/NO.5/NO.6. This finish has smooth, soft and exquisite grains which has a low level of reflectivity and unidirectional texture.

Available in 304/430/201/316.

HL(Hair Line)

Hairline is a two-step abrasive polished finish with superior matching characteristics. It’s designed for architectural applications. It boasts a more linear appearance than traditional #4 polish, which means it lends itself to repair and blending in the field. #6 Hairline is suitable for coping, trim, elevator cabs, and more. Can be coated with anti-fingerprint coating for interior use.

Available in 304/430/201/316.

Coil

  • Comply with the standard of ASTM 240/480,JIS G4305,EN10204 3.1
  • Grade:430/301/304/304L/316/316L/201
  • Finish:
    No.1/2B/BA/NO.4/HL/SB
  • Thickness:
    0.28~8.0 mm
  • Width:
    600~1600 mm
  • ID:
    508 mm
  • According to Standard:
    ASTM 240/480,JIS G4305,EN10204 3.1
  • Remark:
    • Polishing Line (Oil base process)
    • Polished surface for both sides available
    • PVC/Laser PVC/double PVC.
    • Jet-ink marking
    • Customize width is available

Specification of stainless coil

Grade Finish Thickness(mm) Ranges of width (mm)
1000 1219 1250 1524
430 2B 0.3 - 3.0
BA 0.3 - 2.0
HL/NO.4/SB 0.3 - 3.0
304 No.1 2.5 - 12.0
2B 0.3 - 3.0
BA 0.3 - 1.5
HL/NO.4/SB 0.3 - 3.0
316L No.1 3.0 - 12
2B 0.5 - 3.0
201 (Ni >1%) No.1 2.5 - 6.0
2B 0.3 - 3.0
BA 0.3 - 1.5

Sheet

  • Comply with the standard of ASTM 240/480,JIS G4305,EN10204 3.1
  • Grade: 430/301/304/304L/316/316L/201
  • Finish:
    No.1/2B/BA/HL/NO.4/NO.8/SB
  • Thickness:
    CR: 0.28~3.0
    HR: 2.5UP
  • Width: 30~1524 mm

Stainless Sheet/Plate (Pre-cut size)

Thickness (mm) Width (mm) Length(mm) PE Coating Paper interleave
CR 0.3 ~ 3.0 1000 2000
1219 2438
1250 2500
1500 3000
1524 3048
HR 3.0 ~ 6.0 1000 2000
1219 2438    
1250 2500    
1500 3000    
1524 3048    
HR 8.0 ~ 50.0 1219 2438    
1500 3000    
1524 3048    

Tolerance of shearing

Length(mm) Width Tolerance (mm) Length Tolerance (mm) Diagonal Tolerance (mm)
400~999 ± 0.01 ± 0.3 ≤ 0.5
1000~2438 ± 0.01 ± 0.5 ≤ 1.0
2439~3658 ± 0.01 ± 0.8 ≤ 1.0
3659~6000 ± 0.01 ± 1.0 ≤ 1.0
  • Max. Length:
    6000 mm
  • German PE film (Blue/Black & White)
  • Customized size is available
  • Thickness of film:
    70/80/100 μm

Strip

  • Comply with the standard of ASTM 240/480,JIS G4305,EN10204 3.1
  • Grade: 430/301/304/304L/316/316L/201
  • Finish:
    No.1/2B/BA/No.4/HL/SB
  • Thickness:
    CR:0.3~3.0
    HR:2.5~6.0
  • Width: Min 10 mm
  • ID: 300/400/508 mm
Thickness(mm) Min. width(mm) Thickness(mm) Min. width(mm)
0.3 10 CR 1.5 35
0.4 10 CR 1.8 35
0.5 10 CR 2.0 35
0.6 10 CR 2.5/HR 2.5 35
0.7 10 CR 3.0/HR 3.0 35
0.8 10 HR 4.0 35
0.9 10 HR 4.5 35
1.0 10 HR 5.0 50
1.2 35 HR 6.0 50

Coil

Exporting packages of S-More stainless coils are strongly protected by water-proof cover and P.P. plates. Between each layer, there is a paper interleaved or Protecting film, ensuring 100% dry condition.

Sheet

Stainless sheet is topped layer by layer on wooden pallets and cover by water-proof plates. Between each layer, there is a paper interleaved or Protecting film, ensuring 100% dry condition.

Strip

Customized stainless strip is fasten by iron bands. Horizontal and Vertical packages are available. Inner diameter from 300 to 508 mm for customers’ selection.

天天看片天天AV免费观看,西西GOGO高清大胆专业,人妻互换免费中文字幕,日本区一视频.区二视频
<thead id="plp1r"></thead>
<listing id="plp1r"></listing>
<var id="plp1r"></var>
<cite id="plp1r"></cite><cite id="plp1r"><video id="plp1r"><menuitem id="plp1r"></menuitem></video></cite>
<var id="plp1r"></var>
<var id="plp1r"></var>
<cite id="plp1r"></cite>
<cite id="plp1r"></cite><var id="plp1r"><strike id="plp1r"></strike></var>
<cite id="plp1r"><span id="plp1r"></span></cite>
<cite id="plp1r"></cite>
<cite id="plp1r"><video id="plp1r"></video></cite>
<var id="plp1r"></var>
<var id="plp1r"></var>